About the rational choice of the damper shape for an ultrasonic piezoelectric transducer
- Autores: Vechera M.S.1, Konovalov S.I.2, Konovalov R.S.2,3, Ch. I.B.4, Tsaplev V.M.2
- 
							Afiliações: 
							- LLC «Constanta US»
- Saint Petersburg Electrotechnical University «LETI»
- Emperor Alexander I St. Petersburg State Transport University
- School of Mechanical Engineering, Changwon National University
 
- Edição: Nº 4 (2024)
- Páginas: 3-15
- Seção: Acoustic methods
- URL: https://rjeid.com/0130-3082/article/view/649261
- DOI: https://doi.org/10.31857/S0130308224040017
- ID: 649261
Citar
Texto integral
 Acesso aberto
		                                Acesso aberto Acesso está concedido
						Acesso está concedido Acesso é pago ou somente para assinantes
		                                							Acesso é pago ou somente para assinantes
		                                					Resumo
The results of the study on the influence of the geometric shape of the damper on its effectiveness and the overall efficiency of the radiation-reception system are presented. One of the possible forms of the damper is considered, where it is shaped like a truncated cone, and its generatrix has an inclination angle relative to the plane of the piezoplate. A criterion for evaluating the efficiency of the damper’s operation is proposed. The study includes the results of computational-theoretical (using the finite element method) and experimental research on the influence of the incline angle of the damper’s generatrix on the signal reflected from its rear part. The inclination angle of the generatrix, at which the minimum of parasitic signals is achieved, is determined. The radiation-reception system is investigated under water loading, and a satisfactory agreement between the theoretical and experimental results is noted.
Palavras-chave
Sobre autores
M. Vechera
LLC «Constanta US»
							Autor responsável pela correspondência
							Email: vms@constanta.ru
				                					                																			                												                	Rússia, 							Saint Petersburg, Ogorodny Lane 21, 198097						
S. Konovalov
Saint Petersburg Electrotechnical University «LETI»
														Email: sikonovalov@etu.ru
				                					                																			                												                	Rússia, 							Saint Petersburg, Prof. Popova, 5, 197022						
R. Konovalov
Saint Petersburg Electrotechnical University «LETI»; Emperor Alexander I St. Petersburg State Transport University
														Email: rskonovalov@etu.ru
				                					                																			                												                	Rússia, 							Saint Petersburg, Prof. Popova, 5, 197022; Saint Petersburg, Moskovsky pr., 9, 190031						
I. Ch.
School of Mechanical Engineering, Changwon National University
														Email: ee.boris@changwon.ac.kr
				                					                																			                												                	República da Coreia, 							Changwon, Changwon National University Road 20, 51140						
V. Tsaplev
Saint Petersburg Electrotechnical University «LETI»
														Email: valery@convergences-fr.ru
				                					                																			                												                	Rússia, 							Saint Petersburg, Prof. Popova, 5, 197022						
Bibliografia
Arquivos suplementares
 
				
			 
						 
						 
					 
						 
						 
									

 
  
  
  Enviar artigo por via de e-mail
			Enviar artigo por via de e-mail 
