Mechanisms of Strengthening Aluminum Foils Consolidated by High-Pressure Torsion Technique

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

The contributions of grain boundary and dislocation mechanisms to the experimentally established strengthening of pure Al samples obtained by consolidation of thin foils by high pressure torsion technique were estimated within the framework of well-known theoretical models using structural parameters (sizes of coherently scattering domains and lattice microstrains) determined by X-ray diffraction. Good agreement between the calculated values and the hardness of deformed and aged samples was found, and possible reasons for their differences for the initial foils were discussed. The influence of deformation and aging on the relative contributions of the analyzed mechanisms to the strengthening of samples consolidated from both Al foils and the rapidly quenched Al95.8Mn3.8Fe0.4 ribbons was determined. The structural features of samples processed by high pressure torsion and the relationship between structural parameters and mechanical properties were discussed.

Толық мәтін

Рұқсат жабық

Авторлар туралы

E. Sviridova

A.A. Galkin Donetsk Institute for Physics and Engineering; Donbas National Academy of Civil Engineering and Architecture

Хат алмасуға жауапты Автор.
Email: ksvir@list.ru
Ресей, Donetsk; Makеyеvka

S. Vasiliev

A.A. Galkin Donetsk Institute for Physics and Engineering; Donbas National Academy of Civil Engineering and Architecture

Email: ksvir@list.ru
Ресей, Donetsk; Makеyеvka

A. Limanovsky

A.A. Galkin Donetsk Institute for Physics and Engineering

Email: ksvir@list.ru
Ресей, Donetsk

V. Varyukhin

A.A. Galkin Donetsk Institute for Physics and Engineering

Email: ksvir@list.ru
Ресей, Donetsk

V. Tkach

A.A. Galkin Donetsk Institute for Physics and Engineering

Email: ksvir@list.ru
Ресей, Donetsk

Әдебиет тізімі

  1. Valiev R.Z., Islamgaliev R.K., Alexandrov I.V. // Progr. Mater. Sci. 2000. V. 45. P. 103. https://www.doi.org/10.1016/s0079-6425(99)00007-9
  2. Estrin Y., Vinogradov A. // Acta Mater. 2013. V. 61. P. 782. https://www.doi.org/10.1016/j.actamat.2012.10.038
  3. Alexandrov I.V., Zhu Y.T., Lowe T.C., Islamgaliev R.K., Valiev R.Z. // Nanostruct. Mater. 1998. V. 10. № 1. P. 45. https://www.doi.org/10.1016/S0965-9773(98)00026-9
  4. Валиев Р.З., Пушин В.Г., Гундеров Д.В., Попов А.Г. // ДАН. 2004. T. 398. № 1. C. 54.
  5. Орлова Т.С., Садыков Д.И., Мурашкин М.Ю., Казыханов В.У., Еникеев Н.А. // ФТТ. 2021. T. 63. Вып. 10. C. 1572. https://www.doi.org/10.21883/FTT.2021.10.51408.104
  6. Михеев В.А., Журавель Л.В. // Изв. вузов. Цветная металлургия. 2016. № 3. C. 56. https://www.doi.org/10.17073/0021-3438-2016-3-56-64
  7. Orlova T.S., Mavlyutov A.M., Latynina T.A., Ubyivovk E.V., Murashkin M.Yu., Schneider R., Gerth- sen D., Valiev R.Z. // Rev. Adv. Mater. Sci. 2018. V. 55. P. 92. https://www.doi.org/10.1515/rams-2018-0032
  8. Adachi H., Osamura K., Ochiai Sh., Kusui J., Yokoe K. // Scr. Mater. 2001. V. 44. P. 1489. https://www.doi.org/10.1016/S1359-6462(01)00715-1
  9. Huang X., Kamikawa N., Hansen N. // Mater. Sci. Eng. A. 2008. V. 483–484. P. 102. https://www.doi.org/10.1016/j.msea.2006.10.173
  10. Васильев С.В., Цветков Т.В., Свиридова Е.А., Ткаченко В.М., Лимановский А.И., Саяпин В.Н., Ткач В.И. // Физика и техника высоких давлений. 2022. T. 32. № 1. C. 8.
  11. Свиридова Е.А., Цветков Т.В., Ткаченко В.М., Лимановский А.И., Саяпин В.Н., Васильев С.В., Ткач В.И. // Тр. Кольского науч. центра РАН. Сер. Тех. науки. 2022. Вып. 6. Т. 13. № 1. С. 223. https://www.doi.org/10.37614/2949-1215.2022.13.1.039
  12. Горелик С.С., Скаков Ю.А., Расторгуев Л.Н. Рентгенографический и электронно-оптический анализ. М.: МИСИС, 2002. 360 с.
  13. Свиридова Е.А., Цветков Т.В., Ткаченко В.М., Лимановский А.И., Саяпин В.Н., Васильев С.В., Ткач В.И. // Тр. Кольского науч. центра РАН. 2021. Вып. 5. Т. 12. № 2. С. 219. https://www.doi.org/10.37614/2307-5252.2021.2.5.045
  14. Sanchez-Bajo F., Ortiz A.L., Cumbrera F.L. // Acta Mater. 2006. V. 54. P. 1. https://www.doi.org/10.1016/j.actamat.2005.08.018
  15. Williamson G.K., Smallman R.E. // Philos. Mag. 1956. V. 1. № 1. P. 34. https://www.doi.org/10.1080/14786435608238074
  16. Самсонов Г.В. Свойства элементов. Справочник. Ч. 1. М.: Металлургия, 1976. 600 с.
  17. Zhang J., Gao N., Starink M.J. // Mater. Sci. Eng. A. 2011. V. 528. P. 2581. https://www.doi.org/10.1016/j.msea.2010.11.079
  18. Lee S.H., Inagaki H., Utsunomiya H., Saito Y., Sakai T. // Mater. Trans. 2003. V. 44. P. 1376. https://www.doi.org/10.2320/matertrans.44.1376
  19. Kamikawa N., Huang X., Tsuji N., Hansen N. // Acta Mater. 2003. V. 51. P. 4803. https://www.doi.org/10.1016/j.actamat.2009.05.017
  20. Hall E.O. // Proc. Phys. Soc. B. 1951. V. 64. P. 747. https://www.doi.org/10.1088/0370-1301/64/9/303
  21. Witkin D.B., Lavernia E.J. // Progr. Mater. Sci. 2006. V. 51. P. 1. https://www.doi.org/10.1016/j.pmatsci.2005.04.004
  22. Hansen N., Huang X. // Acta Mater. 1998. V. 46. № 5. P. 1827. https://www.doi.org/10.1016/s1359-6454%2897% 2900365-0
  23. Myhr O.R., Grong Ø., Andersen S.J. // Acta Mater. 2001. V. 49. P. 65. https://www.doi.org/10.1016/S1359-6454(00)00301-3
  24. Zhang P., Li S.X., Zhang Z.F. // Mater. Sci. Eng. A. 2011. V. 529. P. 62. https://www.doi.org/10.1016/j.msea.2011.08.061
  25. Latynina T.A., Mavlyutov A.M., Murashkin M.Yu, Valiev R.Z., Orlova T.S. // Philos. Mag. 2019. V. 99. № 19. P. 2424. https://www.doi.org/10.1080/14786435.2019. 1631501

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
Жүктеу
2. Fig. 1. Diffractograms of Al foil in the initial state (1) and after deformation – rotation by 1 vol. under pressure of 2 GPa (2)

Жүктеу (80KB)
Метадеректер
3. Fig. 2. The effect of the consolidation mode on the hardness of Al discs: ▲ - 2 GPa, 1 vol.; ▼ – 4 GPa, 1 vol.; ■ - 4 GPa, 4 vol. The dashed line shows the hardness of the original foil

Жүктеу (90KB)
Метадеректер
4. Fig. 3. The effect of natural aging on the hardness of the Al disk consolidated in the 4 GPa, 4 vol. mode: ■ – after deformation; ● – after a year of exposure

Жүктеу (80KB)
Метадеректер

© Russian Academy of Sciences, 2024